Promo of the week
Sort by:
I recommend a terracotta pot of around 9cm.
Parcel packaging:
*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).
The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:
*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:
1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.
2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.
3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).
If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.
Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle
This variety of alocasia is distinguished by its cup-shaped, upward-facing leaves.
According to the International Aroid Society, this plant is awarded as the most unusual aroid. This plant is native to the United States and was first introduced this year it came to Europe.
It is a fairly easy plant to grow thanks to its compact size. You will receive a similar cutting of approximately 35 cm.
I will recommend a pot of around 12cm.
The cuttings are sent bare root, well protected in sphagnum pouches. If the weather in your area drops below 10 degrees overnight, I advise you to take a heat pack with the cutting.
The Heat Pack direct link:
https://www.etsy.com/fr/listing/937709115/heat-pack-plant?click_key=08960241d401e7c0af66692582545c685ac6ad96%3A937709115&click_sum=52d296ed&ref=shop_home_active_1&frs=1&crt=1
Many more cuttings available on monjungle.com
I recommend a pot of approximately 8.5cm in diameter for these cuttings.
Parcel packaging:
*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).
The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:
*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:
1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.
2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.
3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).
If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.
Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle
Parcel packaging:
*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).
The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:
*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:
1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.
2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.
3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).
If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.
Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle
Parcel packaging:
*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).
The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:
*You have your cuttings now. What to do?
The cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:
1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the amount of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.
2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.
3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).
If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.
Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle
Parcel packaging:
*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).
The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:
*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:
1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.
2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.
3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).
If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.
Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle
La syngonium red spot tricolor! Vous allez recevoir une bouture d'entre trois et quatres feuilles.
Syngonium red spot est également une syngonium rare mais il n'y a pas des splashes de vert menthe sur la partie rose.
Je vous conseil un pot en terre cuite d'environ 9cm en dia.
Emballage de colis:
*Les boutures sont emballées racines nues, bien protégées en sphaigne (pour garder l’humidité pendant leur voyage). Selon les espèces de boutures (par exemple les succulentes), parfois je mets de sphaigne séchée ou je les emballe dans le pot de culture.
*Toutes les boutures vendues dans la boutique sont enracinées en terre et substrat (sauf indiquées dans l’annonce).
* Les boutures sont ensuite emballées dans une papier kraft (environ 90 gm d’epaisseur) et elles sont glissées dans les cartons solides et rigides. Selon le type de plante, je rajoute également deux couches de papier kraft et on secure les continents de colis avec du papier. Je limite l’utilisation de plastique au maximum que je peux.
Les Envoies:
*NOUVEAU: Pickup possible directement dans notre showroom à Septèmes-les-vallons (13240), Fr. N’hésitez pas à me contacter pour finaliser :)
*Les envoies pour la FRANCE sont effectuées du lundi au jeudi. Les colis partent avec Colissimo sans signature. Si vous voulez, je peux également vous envoyer dans les points relay de votre choix. N'hésitez pas à me contacter (numéro de portable est obligatoire dans ce cas).
*Les envoies vers l’UE sont effectuées seulement le lundi ( rarement mardi ou mercredi si le temps me permets).
Le Heat Pack:
*Le heat pack est une chaufferette qui est très utile pour le transport de boutures pendant l’hiver. Il aide les boutures à garder un peu de chaleur en période de gel.
*Les heat packs sont tout simplement à jeter après l’usage. On ne les mélange pas dans nos substrats etc.
*On les commande quand le temps de nuit (ou du matin) baisse de moins 10 degrés.
*Le heat pack est vendu séparément et le lien direct est ici:
https://rb.gy/orzwxr
Après le réception de colis:
*Vous avez vos boutures maintenant. Quoi faire?
Les boutures reçues en colis sont parfois faim et fatiguées, ce qui est très normal après un voyage. Avant de les remporter directement, on prend un petit verre avec (¼ part d’eau) et on mettre la sphaigne reçue et la bouture dedans pour environ 3 ou 4 heurs (on passe pas la bouture directement en eau car les racines sont habituées de substrat et les bactérie dans le substrat en combination avec d’eau peuvent provoquer une pourriture. Si jamais vous voulez passer les boutures en hydro, il faut bien laver les racines avec de l'eau tiède (plusieurs fois).
Le choix de pot:
1.Taille
On adopte toujours les pots en taille correcte.
La risque de pourriture de racines est très élevée quand une bouture est dans un pot trop grand car la quantité de substrat et d’eau est très importante pour les racines.
Grand pot = Beaucoup de substrat = Beaucoup d’eau= Trop de temps de sécher et les racines se trouvent baignent dans l’eau.
Donc c’est important de mettre le bon diamètre de pot.
2. Matérial
On parle souvent de matériel de pot, on passe par un pot en terre cuite ou en plastique (avec un cache pot) etc.
Les pots en terre cuites sont généralement idéals pour les plantes. Ils aident à évacuer le surplus d’eau avec toute la surface de pot et ils aident également les racines à sécher un peu rapidement avant le prochain arrosage. MAIS dans certaines espèces de plantes (comme calathea/ Maranta etc) les racines n’aiment pas les périodes de sécheresses (même les plus courtes) et ici on adopte les pots en plastiques qui sont très utiles à garder l’humidité.
3. Fond
On adopte toujours les pots avec le fond percé (quel que soit le pot, en céramique, en plastique ou même en terre cuite).
Si vous avez des autres questions, n’hésitez pas à me demander. Je serai ravie de vous répondre.
Retrouvez moi sur instagram et facebook pour découvrir mon univers végétale:
www.instagram.com/mon.jungle
www.facebook.com/mon.jungle
In our salons, we help them with tutorials which will further help the growth of this plant.
You will receive a magnificent cutting of several leaves well rooted in the ground (Size S)
My advice:
You will need a terracotta pot approximately 8cm in diameter. Do not let the substrate dry out between two waterings.
Parcel packaging:
*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).
The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:
*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:
1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.
2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.
3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).
If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.
Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle
Vous allez recevoir
1 Alocasia Silver Dragon (pot de 6cm)
2 Boutures de monstera siltepecana (pot de 6cm)
1 Bouture de scindapsus moonshine (pot de 6cm)
1 Bouture de Hoya Mathilde splash (pot de 6cm)
3 boutures de ceropegia woodii silver (pot de 6cm)
Bouture d'une feuille enracinée en terre.
Cutting rooted in soil 3/4 leaves.
I recommend a plastic pot of around 9cm in diameter.
I recommend a pot of around 15cm in diameter.
Parcel packaging:
*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).
The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:
*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:
1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.
2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.
3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).
If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.
Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle
Vous allez recevoir une belle bouture bien enracinée en terre.
Emballage de colis:
*Les boutures sont emballées racines nues, bien protégées en sphaigne (pour garder l’humidité pendant leur voyage). Selon les espèces de boutures (par exemple les succulentes), parfois je mets de sphaigne séchée ou je les emballe dans le pot de culture.
*Toutes les boutures vendues dans la boutique sont enracinées en terre et substrat (sauf indiquées dans l’annonce).
* Les boutures sont ensuite emballées dans une papier kraft (environ 90 gm d’epaisseur) et elles sont glissées dans les cartons solides et rigides. Selon le type de plante, je rajoute également deux couches de papier kraft et on secure les continents de colis avec du papier. Je limite l’utilisation de plastique au maximum que je peux.
Les Envoies:
*NOUVEAU: Pickup possible directement dans notre showroom à Septèmes-les-vallons (13240), Fr. N’hésitez pas à me contacter pour finaliser :)
*Les envoies pour la FRANCE sont effectuées du lundi au jeudi. Les colis partent avec Colissimo sans signature. Si vous voulez, je peux également vous envoyer dans les points relay de votre choix. N'hésitez pas à me contacter (numéro de portable est obligatoire dans ce cas).
*Les envoies vers l’UE sont effectuées seulement le lundi ( rarement mardi ou mercredi si le temps me permets).
Le Heat Pack:
*Le heat pack est une chaufferette qui est très utile pour le transport de boutures pendant l’hiver. Il aide les boutures à garder un peu de chaleur en période de gel.
*Les heat packs sont tout simplement à jeter après l’usage. On ne les mélange pas dans nos substrats etc.
*On les commande quand le temps de nuit (ou du matin) baisse de moins 10 degrés.
*Le heat pack est vendu séparément et le lien direct est ici:
https://rb.gy/orzwxr
Après le réception de colis:
*Vous avez vos boutures maintenant. Quoi faire?
Les boutures reçues en colis sont parfois faim et fatiguées, ce qui est très normal après un voyage. Avant de les remporter directement, on prend un petit verre avec (¼ part d’eau) et on mettre la sphaigne reçue et la bouture dedans pour environ 3 ou 4 heurs (on passe pas la bouture directement en eau car les racines sont habituées de substrat et les bactérie dans le substrat en combination avec d’eau peuvent provoquer une pourriture. Si jamais vous voulez passer les boutures en hydro, il faut bien laver les racines avec de l'eau tiède (plusieurs fois).
Le choix de pot:
1.Taille
On adopte toujours les pots en taille correcte.
La risque de pourriture de racines est très élevée quand une bouture est dans un pot trop grand car la quantité de substrat et d’eau est très importante pour les racines.
Grand pot = Beaucoup de substrat = Beaucoup d’eau= Trop de temps de sécher et les racines se trouvent baignent dans l’eau.
Donc c’est important de mettre le bon diamètre de pot.
2. Matérial
On parle souvent de matériel de pot, on passe par un pot en terre cuite ou en plastique (avec un cache pot) etc.
Les pots en terre cuites sont généralement idéals pour les plantes. Ils aident à évacuer le surplus d’eau avec toute la surface de pot et ils aident également les racines à sécher un peu rapidement avant le prochain arrosage. MAIS dans certaines espèces de plantes (comme calathea/ Maranta etc) les racines n’aiment pas les périodes de sécheresses (même les plus courtes) et ici on adopte les pots en plastiques qui sont très utiles à garder l’humidité.
3. Fond
On adopte toujours les pots avec le fond percé (quel que soit le pot, en céramique, en plastique ou même en terre cuite).
Si vous avez des autres questions, n’hésitez pas à me demander. Je serai ravie de vous répondre.
Retrouvez moi sur instagram et facebook pour découvrir mon univers végétale:
www.instagram.com/mon.jungle
www.facebook.com/mon.jungle
Une bouture bien enracinée en terre
vous allez recevoir la bouture exacte.
Vous allez recevoir la bouture exacte.
A cutting well rooted in the ground.
Parcel packaging:
*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).
The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:
*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:
1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.
2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.
3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).
If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.
Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle
I recommend a terracotta pot of around 12cm
Parcel packaging:
*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).
The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:
*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:
1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.
2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.
3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).
If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.
Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle
1. Cutting option: Cutting of two nodes minimum
2. Rooted option: Two cuttings well rooted in the ground
Parcel packaging:
*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).
The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:
*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:
1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.
2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.
3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).
If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.
Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle
Plante d'intérieur rare, elle sera expédiée dans un pot de 8,5cm en dia.
