Mixture of calathea/maranta in sachet for your plants approximately 300gm (for two 8.5cm diameter pots).

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Perlite is a white mineral of volcanic origin that is very porous and light.
Easy to use. Ideal for seedlings and cuttings.
Mixed with the growing medium, it lightens the soil ensuring aeration and drainage. Its high porosity retains water and serves as a reserve, making it available to plants.
On the surface, it reflects light and protects plants against high temperatures.

Pouch approximately 65/70gm

Coco peat in a bag to mix according to the needs of your plants.

If you use 10% coco peat in a mixture, the sachet can serve you about 15 pots of approximately 8.5cm dia.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Mixture of alocasia in sachet for your plants approximately 300gm (for two pots 8.5cm in diameter).


The mixture contains coconut chips, cocopeat, sphagnum moss, perlite and the substrate in the perfect quantities to properly grow your alocasia cuttings.


Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

PERLITE is a white mineral of volcanic origin, very porous and light.

Easy to use. Ideal for seedlings and cuttings.
Mixed with the growing medium, it lightens the soil ensuring aeration and drainage. Its high porosity retains water and serves as a reserve, making it available to plants.
On the surface, it reflects light and protects plants against high temperatures.

Pouch approximately 60/70gm

VERMICULITE is a mineral from the micas family, brown in color and with a laminar structure, essentially composed of aluminum, magnesium and iron silicates.
It is an inert, highly porous material, very light, strong and durable.
It retains nutrients and moisture and releases them when the plant needs them.

3D design and with recycled plastic.

You will receive a pot approximately 12cm in diameter with its water spout and stem for self-watering.

Ideal mix for anthurium cuttings in bags for your plants approximately 300gm (for two pots 8.5cm in diameter).


The mixture contains the substrate, perlite, coconut chips, coconut fiber in the appropriate quantities for your cuttings.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/mon.jungle shopupz inactive

Soil for cuttings of epipremnum harlequin which will suffice two 8.5cm pots.

It will be delivered to you dried with fertilizer already mixed (which will be enough for approximately 2 months).

Choose a terracotta pot for this cutting.


Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

To properly maintain humidity.
Pouch approximately 170 gm

Ideal mix for philodendron/ syngonium cuttings in bags for your plants approximately 300gm (for two pots 8.5cm in diameter).


The mixture contains the substrate, perlite, coconut chips, coconut fiber in the appropriate quantities for your cuttings.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Mixture of aglaonema in sachet for your plants approximately 300gm (for two pots 8.5cm in diameter).

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Bag of dried sphagnum moss to hydrate with water before use in very good quality.

Substrate of mineral origin as an alternative to potting soil
You will receive the substrate which will be sufficient for the two 8.5cm diameter pots.

Mixture of hoya in a bag for your plants approximately 300gm (for two pots 8.5cm in diameter).

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

A bag of live sphagnum moss, ideal for terrariums, seedlings or cuttings.
Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

You will receive a pot approximately 9cm in diameter with its water spout and stem for self-watering.
Possible to add the lechuza pon pack (ideal substrate for hydroponics)

Half a stick is enough for a cutting in a pot of approximately 8cm in diameter for eight weeks.
Insert the stick completely into the pot when repotting.
You will receive 10 sticks.

No need to apply liquid fertilizer every two weeks. I offer you the 'slow release' fertilizer in a sachet which will provide nutrition to your house plants of all varieties.