Philodendron Red Heart, a magnificent cutting well rooted in the ground. Only the leaves in the middle are bright red. The leaves also change color very often.
I recommend a terracotta pot of around 8cm in diameter.
Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
The cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the amount of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a terracotta pot of approximately 12 cm in diameter.


Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a terracotta pot of around 12 cm.

The ideal mixture for this cutting is available here:
https://www.etsy.com/fr/listing/1475466220/melange-philodendron-syngonium?click_key=b4b0a7fcac0e5f0e16dc1c5eb7bf9803c5a146de%3A1475466220&click_sum=21dd4739&ref=shop_home_active_3

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)
*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:
*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).

The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

You will receive a magnificent margin cutting of philodendron Hastatum aka philodendron Silver sword. The cutting will be at least 40 cm with several nodes. You can also take advantage of making several future cuttings.

**I pack packages with the greatest care (if you have already purchased, you know this). Please add a heat pack (shipping heater available on the shop) if you are not sure and you can leave me a message when ordering. I will check the temperatures in your area and if necessary, I will cancel the heat pack myself.

You will receive a beautiful mature cutting of Florida Green Beauty (between 20-30cm). The first photo is the photo of the adult mother plant. You can see its potential! And I'm sure you'll be fascinated by these red petioles...
Florida is a climber that grows very quickly. They are the favorite of collectors.
Florida green is a tropical plant and very easy to grow. It makes a wonderful houseplant.

Find the entire Philodendrons collection here:
https://www.etsy.com/fr/shop/MonJungle?ref=seller-platform-mcnav&section_id=31511372

To return to the store:
https://www.etsy.com/fr/shop/MonJungle?

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Several options available.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/mon.jungle shopupz inactive

Around 45cm, I recommend a terracotta pot of around 15cm in diameter.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a terracotta pot of approximately 12cm in diameter.

INTERVIEW: https://monjungle.com/blogs/news/interview-philodendron-pink-birkin

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the amount of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Local production, the cuttings are made myself and all the cuttings are rooted in the ground.

Each cutting will be packaged with great care. They come from a mother plant with lots of plumes.

Philodendron Burle Marx variegata is a tropical plant that is easy to care for. It is perfect as a houseplant. Each leaf can grow up to 30cm.

Find the entire collection in Rare Plants here:
https://www.etsy.com/fr/shop/MonJungle?ref=simple-shop-header-name&listing_id=956705879§ion_id=32536403

Return to the boutique :
https://www.etsy.com/fr/shop/MonJungle?

Find me on Instagram and Facebook to discover my plant world:

www.instagram.com/my.jungle
www.facebook.com/my.jungle

Water when the soil surface is dry. This will normally be once every 7 days during the summer months and once every 14 days during the winter.

Lot of two orange philodendrons, Philodendron orange sun and philodendron prince of orange, both rare plants for the home
I recommend a terracotta pot of approximately 8.5cm in diameter.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).

The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

You will receive a cutting of a leaf rooted in the ground.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
The cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Lot of three philodendrons well rooted in the ground.

I recommend a terracotta pot of approximately 8.5cm in diameter for these philos.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the amount of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry out and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

You will receive a beautiful cutting of approximately +/- 40 cm in height.
I recommend a pot of around 15cm in diameter.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).
The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

You will receive a cutting of approximately 2/3 leaves well rooted in the ground.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

For the first time in France, the Florida Bronze philodendron.
I recommend a terracotta pot of around 12 cm for this cutting.


Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

You will receive at least two cuttings in the ground. It is a little-known variety of monstera. The difference is in the matured leaves.
The leaves of a monstera liniata, esquelato, adansonii or even monstera obliqua peru, they all have holes but there is a real difference in their shape, their growth, their holes. The mature format is totally different.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

You will receive the cutting perfectly rooted in the ground with a good root system.
I recommend a terracotta pot of around 9cm.
Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.
Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:
*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr
After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).

The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

You will receive a cutting(s) in its small growing pot. I recommend a small pot of around 7.5cm in diameter.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Philodendron 'Painted Lady' is a very beautiful plant with ornamental leaves with pink petioles. Philodendron Painted Lady has gorgeous foliage that looks like a watercolor painting.
The young leaves are almost neon yellow in color.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
The cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle