A cutting well rooted in the ground.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).

The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

A cutting well rooted in the ground.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).

The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Hoya picta puber, a cutting rooted in soil.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a plastic pot of around 9cm in diameter.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a pot of approximately 12 cm in diameter.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a plastic pot of around 12cm in diameter.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a plastic pot of around 12cm in diameter

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
The cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Blonde peat in bags for your plants approximately 300gm (for two pots 8.5cm in diameter).

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/mon.jungle shopupz inactive shopupz inactive shopupz inactive shopupz inactive shopupz inactive shopupz inactive shopupz inactive

I recommend a pot of around 8.5cm in diameter

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

A cutting of approximately 35cm.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a terracotta pot of approximately 8.5cm in diameter.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
The cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the amount of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Mixture of coleus in a bag for your plants approximately 300gm (for two pots 8.5cm in diameter).

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/mon.jungle shopupz inactive shopupz inactive shopupz inactive shopupz inactive shopupz inactive shopupz inactive shopupz inactive

I recommend a plastic pot of around 12cm.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a plastic pot of around 12 cm.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a 12 cm pot.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

I recommend a terracotta pot of approximately 7cm in diameter.
Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Magnificent cutting rooted in the ground. I recommend a plastic pot of around 12cm in diameter.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

Several options available.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/mon.jungle shopupz inactive

Between 4/6 sheets.

I recommend a terracotta pot of approximately _.5cm in diameter.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle

You will receive a beautiful, well-rooted cutting of the size suggested in the photos.
I recommend a 12cm dia pot.

Parcel packaging:

*The cuttings are packaged bare root, well protected in sphagnum moss (to retain humidity during their journey). Depending on the species of cuttings (e.g. succulents), sometimes I put dried sphagnum moss or pack them into the growing pot.
*All cuttings sold in the store are rooted in soil and substrate (unless indicated in the advertisement).
* The cuttings are then wrapped in kraft paper (approximately 90 gm thick) and they are slipped into strong and rigid boxes. Depending on the type of plant, I also add two layers of kraft paper and secure the package continents with paper. I limit the use of plastic as much as I can.

Shipments:
*NEW: Pickup possible directly in our showroom in Septèmes-les-vallons (13240), Fr. Do not hesitate to contact me to finalize :)

*Shipments for FRANCE are made from Monday to Thursday. Parcels are sent with Colissimo without signature. If you want, I can also send you to the relay points of your choice. Do not hesitate to contact me (mobile number is obligatory in this case).
*Sends to the EU are only made on Mondays (rarely Tuesday or Wednesday if time permits).

The Heat Pack:

*The heat pack is a heater that is very useful for transporting cuttings during the winter. It helps the cuttings retain some warmth during periods of frost.
*Heat packs should simply be thrown away after use. We do not mix them in our substrates etc.
*We order them when the night (or morning) temperature drops by minus 10 degrees.
*The heat pack is sold separately and the direct link is here:
https://rb.gy/orzwxr

After receiving the package:

*You have your cuttings now. What to do?
Cuttings received in packages are sometimes hungry and tired, which is very normal after a trip. Before taking them directly, we take a small glass with it (¼ part of water) and we put the sphagnum moss received and the cutting in it for about 3 or 4 hours (we do not pass the cutting directly in water because the roots are used to substrate and bacteria in the substrate in combination with water can cause rot. If you ever want to hydro the cuttings, you must wash the roots well with lukewarm water (several times).


The choice of pot:

1.Size
We always use the correct size pots.
The risk of root rot is very high when a cutting is in a pot that is too large because the quantity of substrate and water is very important for the roots.
Large pot = Lots of substrate = Lots of water = Too much time to dry and the roots are bathed in water.
So it is important to put the correct pot diameter.

2. Material
We often talk about potting material, we use a terracotta or plastic pot (with a pot cover) etc.
Terracotta pots are generally ideal for plants. They help drain excess water from the entire pot surface and they also help the roots dry out a little quickly before the next watering. BUT in certain species of plants (like calathea/Maranta etc) the roots do not like periods of drought (even the shortest) and here we adopt plastic pots which are very useful in retaining humidity.

3. Background
We always choose pots with a pierced bottom (whatever the pot, ceramic, plastic or even terracotta).

If you have any further questions, please don't hesitate to ask me. I will be happy to answer you.

Find me on Instagram and Facebook to discover my plant world:
www.instagram.com/my.jungle
www.facebook.com/my.jungle